|
|
 |
| |
 |
| |
|
FSUIPC
As with many programmes accessing off the shelf flight simulations,
Motion Drive utilises the excellent FSUIPC software developed
by Peter Dowson. FSUIPC is not freeware, so you will need
to purchase and register it if you do not already have it.
This can be downloaded from the Peter Dowson website, www.schiratti.com/dowson.html.
If you already have FSUIPC installed in your flight simulation,
you do not need an extra installation. Motion Drive 3.0 will
work alongside other software accessing data from the simulation.
Although you will be able to use Motion Drive 3.0 with FSUIPC
version 2.96 onwards, we recommend that you use the latest
valid version, which is fully supported by Peter Dowson.
|
| |
| |
| |
|
Motion Software
Motion Drive 3.0 now available!!
Our motion base sofware, Motion Drive 3.0, is one fo the essential
components you will need in building your motion base. We have developed
this programme from our own original software specifically to suit
those with their own motion simulation project. It is packed with
features to allow a range of platform configurations. See below
for full technical details. To see how software and hardware fit
together, see our page on "Where
is all fits".
- USB connection to your PC
- Will run two or three motion axes
- Will run two, three or four platform drives
- Will run unipolar or bipolar DAC modes
- Supports platform sensors for up to 3 axes
- Configured for full range of Microsoft FS and CFS series
- New simulations can be added
- Separate configuration for each flight sim package
- Individually configurable planes for each simulation
- Package includes two USB input/output modules
- Full platform configuration instructions included
|
Motion Drive 3.0
Technical Specification
System requirements
- Windows 98SE or later (not yet compatible with Vista)
- 1Mb hard disk space
- CD ROM drive (for installation)
- two free USB ports (for connection of input/output modules)
- requires implementation of FSUIPC software. (see panel on
left)
- must run on master PC of a master/slave PC system
Programme features:-
- controls motion platforms with the following combination
of axes, drives and digital to analogue
converter (DAC) modes.
|
DAC mode >>
|
Unipolar
|
Bipolar
|
|
Motion Axes >>
|
2 Axis
|
3 Axis
|
2 Axis
|
3 Axis
|
| Two Drives/Motors |
Yes
|
-
|
Yes
|
-
|
| Three Drives/Motors |
Yes
|
Yes
|
Yes
|
Yes
|
| Four Drives/Motors |
Yes
|
Yes*
|
Yes
|
Yes*
|
| |
|
|
|
|
| * needs extra USB module - please contact
us |
- works with Microsoft Flight Simulator and Combat Flight
simulator series
- separate configurable settings for the platform, for each
simulation and for up to 5 planes per simulation.
- sensor set up and testing supported
- manual and automatic operation of the platform
- input and output of 8bit logic values through one of two
supplied USB input/output modules.
Package includes:-
- MotionDrive 3.0 motion base software
- two USB input/output modules
- full instructions for platform set up and configuration
Programme and instructions supplied on CD-ROM only
Click
here for full documentation (Opens new window,
simply close window to return to this page).
|
You can now buy this fantastic software package online using the
secure online payment services of Paypal. Please note that payments
are to Active Simulation Limited, the parent company of Classic
Flight.
|
